Company
Emeks Vzmeti d.o.o. is a company for production of springs, spring elements and other spring parts with production in Slovenia (Maribor). The employees have a 20+ years of experience in spring industry.
About us
First workshop we had in industry zone »Elektrokovina« – Tržaška cesta 23, Maribor
In June 2018 we moved the whole company to new workshop in industry zone »Pobrežje« (ex CPM, old »Svila«, Marprom). Address is » Ob Dravi 6, Maribor«.
For quick and quality production of springs we have a wide range of products and technological solutions.
In year 2016 we recieved ISO9001 certificate (Issued by TUV SUD Sava).
Please, Visit us and get an overview about specialities in our company!
Company was encorporated in 2005, when we started with production. On start we had production in industry zone »TVT«. At that time we made promotion of our company at Maribor and neighborhood,because Maribor is a center of Slovenian metal industry.
In 2008 we moved to industry zone – »Elektrokovina«, Trzaska cesta 23D, Maribor.
In 2018 we moved to new industry zone »Pobrežje – CPM«, addres »Ob Dravi 6, Maribor«.
In few past years we are succesfully increasing our share on the market in Slovenia. We accomplish that with:
- Fast response to the customers
- Investing in technological equipment
- Offering of complete service for springs and parts – from design to solution
Products
Our production is able to produce sprrings, spring elements and bended parts from standard qualities of material and dimensions from 0,2mm – 30mm.
You can get a overlook of the materials here. For production we can us your design, of we make an appropriate design from the intended use. All our products can be tested and we can issue a measuring certificate. If needed we can apply different surface protection (sand blasting, shot peeing, zincing, chroming, brunating, painting,..). All parts can be combined with rubber or plastic.
V podjetju za vas izdelujemo tlačne vzmeti, natezne vzmeti, torzijske vzmeti, krožnikaste vzmeti, orodjarske vzmeti. Nudimo vam razne vzmetne izdelke, izdelke v kombinaciji z gumo ter izdelke iz kmetijskega programa.
- COMPRESSION SPRINGS
- EXTENSION SPRINGS
- TORSION SPRINGS
- SPRING BENDED PARTS
- DIE TOOL SPRINGS
- BELLEVILLE SPRINGS
- SPRING PARTS / COMBINED WITH PLASTICS OR RUBBER
- FARMER PROGRAM
COMPRESSION SPRINGS:
Compression springs are made in our factory from thickness of 0,2 – 35 mm. The standard types of material we use are:
- EN 10270-1, DIN 17223 B/C/D (patented wire)
- EN 10270-3, W.Nr. 1.4310 (INOX spring wire)
- 51CrV4
- 67SiCr5
You can take an overview of the material types in this document.
What I have to know when ordering:
Make a copy of this document or send us this parameters of spring:
- D – Wire thickness (mm)
- L0 – Free length (mm)
- Dsr – Spring middle diameter
- Is – number of turns
- Type of material
Extra parameters:
- Left/right turning
- Fmax (maximum working force)
- Making of ends (grinded or not)
- Work frequency
If you know only few parameters of the spring, we can calculate the missing parametes (spring design).
EXTENSION SPRINGS:
We produce extension spring from thickness 0,3 – 24mm. The standard types of material we use are:
- EN 10270-1, DIN 17223 B/C/D (patented wire)
- EN 10270-3, W.Nr. 1.4310 (inox spring – music wire)
You can take an overview of material types in this document.
What I have to know when ordering…
Make a copy of this document or send us this parameters of spring:
- L0 = Spring length
- Dsr = Spring middle diameter
- D = Wire diameter
- Lk = Length of the spring body
- Material type
- Spring ends (German, English)
Extra parameters:
- Left/right turn
- Number of turns
- F1 (force), when extended to L1 (length)
If you know only few parameters of the spring, we can calculate the missing parametes (spring design).
TORSION SPRINGS:
Torsion springs we produce from diameter 0,3 – 5mm. We can produce springs according to your drawings or as per sample.
What I have to know when ordering…
Print this document or send us this parameters of spring:
- D- Wire diameter
- Dsr – Spring middle diameter
- L0 – Spring Length
- Left / right turn
- Type of material
Extra parameters:
- Spring ends (degrees between ends)
If you know only few parameters of the spring, we can calculate the missing parametes (spring design).
SPRING BENDED PARTS:+
We produce also different bended springs parts, different thicknesses (0,3 – 20mm).
You can find catalog on this document (pdf)
DIE TOOL SPRINGS:
We produce or supply different types of die tool springs.
You can find catalog in this document (pdf)
BELLEVILLE SPRINGS:
We produce springs according to DIN 2094. We produce it from spring flat sheets, thickness 0,5 – 12mm.
You can find catalog in this document (pdf)
SPRING PARTS / COMBINED WITH PLASTICS OR RUBBER:
We are producing also parts which are combined with rubber or plastics.
FARMER PROGRAM:
We also produce different spring parts for all kind of farmer machines.
Services
SPRING DESIGN
We can design your spring according to parametes, or we can calculate the neccesary parameters. Make a phone call to us, so we can help you!
Because we want to provide our customers with full service, we can also provide additional services for you, which can be an integral part of the product manufacturing process or also as a standalone service of performing a specific operation.
Contact
For inquiries, orders or other information, you can use this contact form:
Company:
Emeks Vzmeti d.o.o.
Ob Dravi 6 (prikaži na zemljevidu)
2000 Maribor
TAX: SI23317841
Reg. num.: 2120259000
+386 (0)2 320 24 10
+386 (0)2 620 98 43
sales: +386 (0)41 669 043
finances: +386 (0)51 378 434
emeks.vzmeti@amis.net
info@emeks.si
CALL US